Vantage Features

Surface Temp Control

When health and safety is a prime consideration, you can limit the surface temperature of Vantage Electric Radiators.

This function is ideal for electric heating in nurseries, care homes, offices, and just about any public building where health and safety is important.

The Vantage Electric Radiator features surface temperature control - enabling you to limit the maximum surface temperature of the radiator to level that is totally safe.

Where there are children or elderly people present, the radiator can be set to run at a maximum output of anywhere between 40% to 80%. The radiator's control module can then be locked to prevent any tampering to ensure that the safety setting remains at all times.

Advanced Energy Management

The processor inside the control module of the Vantage is key to the high performance and reduced consumption.

The proportional integral control system reduces fluctuations in room temperature by monitoring the heating cycle continuously. Rather than switching "ON" and "OFF" throughout the heating cycle, the AEM chip draws power proportionally using exactly the wattage required on a drip-feed.

The result: An excellent comfort level and reduced energy consumption, and no "clicking" noises.

Energy Monitor

See how much energy your radiator uses in real time, the previous day, week, month, and even year.

This is a powerful feature that allows you to easily track your energy usage in each room, plan your bill payments in advance, and take action to lower your usage.

The Vantage Energy Monitor allows you to see exactly how much energy your room requires to heat. If any one particular room or area seems to be taking more energy to heat than others of a similar size, it's likely that the insulation in that area is poor.

"High heat-loss factors equal high energy bills, so if you can, INSULATE."

Open Window Sensor

The open window sensor guards against wasted energy.

Sometimes when too warm, people simply open a window. If the heating is on, the result is wasteful and expensive.

During the heating cycle, the Vantage Radiator monitors the air temperature continuously. If a sudden drop in the ambient room temperature is detected, the radiator will pause its heat output for thirty minutes.

After thirty minutes the radiator will resume heating at the programmed setting, but only if the room temperature has increased once the window has been closed.

Adaptive Start

An intelligent solution to a common heating problem:

As the weather changes throughout the year and temperatures vary from day to day, it's impossible to predict how long it may take to warm-up your property.

If you're due home at 6.00 pm, when should your heating switch on?  Too early and you waste energy, too late, and you'll be cold.

Our solution: Adaptive Start. Simply program your Vantage Radiator for a 6.00 pm Adaptive Start, and your room will be at your desired temperature at 6.00 pm.

The Vantage Radiator monitors the room temperature in advance of your start time and applies precisely the energy required to meet your rooms requirement - whatever the weather.

A better quality all-round

Discolouration occurs because plastic is an oil-based compound. The dye and oil polymers used to make the plastic degrade as they are exposed to heat, light, and airborne dust particles.

Some electric radiators are constructed with plastic to cut manufacturing costs. Plastic panels at the ends, top or bottom, and in the housing around the controls are particularly susceptible to yellowing. Even when new, you will notice a slightly different colour between the metal and plastic parts. This becomes more pronounced over time.

All EHE Electric Radiator bodies are 100% metal. That includes the end panels. The metal is finished in a tough scratch resistant coating that stays white indefinitely. 

We don't source aluminium parts and assemble them. Our manufacturer owns the foundry where the raw aluminium is produced. This allows a level of quality control, development and traceablity that's impossible for others to attain.  Watch the video to the right, to see the process -  molten metal to finished radiator.

Need a hand?

Let’s get started.

We’re here to help you – not push you into a purchase. Get in touch with a friendly heating expert today